<aside> ⚠️ Always use a Heckler Lectern with a Desk Pad installed. The powder-coated finish of the desktop is designed to be protected from wear by using an H902 Desk Pad.

</aside>

In the Box

• Desk Pad for Heckler Lectern 4U

• Vinyl squeegee

  

H902. Lectern Deskpad_UG_1.mp4

Installation

• [ ] Clean the desktop with a soft cloth and isopropyl alcohol to remove any oils.

H902. Lectern Deskpad_UG_2.mp4

• [ ] Unroll the desk pad and place it on the desktop.

<aside> 💡 It is normal for the desk pad to not lay completely flat at this point.

</aside>

H902. Lectern Deskpad_UG_3.mp4

• [ ] Flip the desk pad face down, then use the supplied squeegee or credit card edge to apply scraping pressure onto the adhesive liner to help ensure the adhesive sticks to the pad, not the liner, during installation.

H902. Lectern Deskpad_UG_4-5.mp4

<aside> 💡 There are subtle marks near the corners of the lectern desktop. These marks are normal and are used to correctly position the desk pad.

</aside>

• [ ] Align the desk pad to cover alignment marks on all four corners and create a consistent border of exposed desktop.

H902. Lectern Deskpad_UG_6.mp4

• [ ] Tape desk pad to desktop in locations shown using masking tape.

H902. Lectern Deskpad_UG_7.mp4

<aside> 💡 To flatten curled edges, carefully massage the curled edge of the desk pad in the opposite direction.

</aside>