In the box

• One large panel

• Two small panels

  

Unpacking

<aside> 💡 To prevent scratches during transit, it is recommended that you unbox and install the modesty panels in the actual room where the lectern will be used.

</aside>

<aside> ⚠️ If your large acrylic modesty panel has a custom logo, a clear plastic protective film has been placed over it to protect the logo during shipping. Slowly remove this film and the adhesive dots that hold it in place.

</aside>

<aside> ⚠️ If your large modesty panel includes a custom-printed logo, this artwork may be covered with a protective film. Leave this protective film in place for now.

</aside>

• [ ] Carefully remove three panels of your modesty panel set from its packaging.
• [ ] Rest each panel on a towel or the packaging foam.
• [ ] Remove the masking paper or film from both sides of each panel.

Assembly

<aside> 💡 Standard modesty panels are frosted of both surfaces. Therefore the panel is reversible and the modesty panel spacers can be installed to either panel side.

</aside>

<aside> 💡 The installation hardware for your modesty panel set is included with your H900 Heckler Lectern.

</aside>

• [ ] Press and install a modesty panel spacer into each pill-shaped hole in the panel.

  

H921. Modesty Panel for Lectern_UG_1.mp4

• [ ] Fasten each modesty panel thumbscrew through the panel and then through the spacer. The spacer will retain the screw, creating a tool-less panel installation.

  

H921. Modesty Panel for Lectern_UG_2.mp4