<aside> 💡 To prevent scratches during transit, it is recommended that you unbox and install the modesty panels in the actual room where the lectern will be used.
</aside>
<aside> ⚠️ If your large modesty panel has a custom logo, a clear plastic protective film has been placed over it to protect the logo during shipping. Slowly remove this film and the adhesive dots that hold it in place.
</aside>
[ ] Carefully remove three panels of your modesty panel set from its packaging.
[ ] Rest each panel on a towel or the packaging foam.
[ ] Remove the masking paper or film from both sides of each panel.
<aside> ⚠️ If your large modesty panel includes a custom-printed logo, this artwork may be covered with a protective film. Leave this protective film in place for now.
</aside>
<aside> 💡 Standard modesty panels are reversible and the modesty panel spacers can be installed to either panel side.
</aside>
<aside> 💡 The installation hardware for your modesty panel set is included with your H900C Heckler Lectern 6U.
</aside>
[ ] Press and install a modesty panel spacer into each pill-shaped hole in the panel.
[ ] Fasten each modesty panel thumbscrew through the panel and then through the spacer. The spacer will retain the screw, creating a tool-less panel installation.
