In the box

• 1 x Meeting Controller Bracket (R613)
• 1 x Quick Release Pin (F936)
• 2 x Set Screw, M4, 25mm long
• 2 x Wingnut, M4

Compatibility

Controller Mount is compatible with:

• Logitech Tap
• Logitech Tap IP
• Neat Bar

Fasten bracket to controller

<aside> 💡 The bracket is reversible. Select if you want the controller mounted to the right or left side of your controller and structure.

</aside>

<aside> 💡 Depending on your controller mount make and model, it is a good idea to connect all cables to your controller before installing the Controller Mount bracket.

</aside>

Fasten the two provided M4 set screws into the threaded mounting positions on the underside of your controller. No tool is required.

Fasten the Controller Mount bracket to the controller using provided wing nuts.

Mount the bracket to structure at the desired height.

<aside> 💡 ADA requirements state that the top edge of the touchscreen should be no more than 48 inches above the finished floor.

</aside>