In the box

  1. 1 x Front Mount
  2. 2 x Mullion-mounting Screw (F063)
  3. 2 x Rubber Washer (F064)
  4. 1 x Set Screw Assembly Key (F914)
  5. 1 x Enclosure Assembly Key (F529)
  6. 1 x Right-angle USB-C to USB-C adapter (F915)
  7. 1 x Velcro dot set
  8. 1 x Cable Tie (F817)


Mount the pocket to your mullion

Determine the height of your installation

<aside> ⚠️ To install the iPad to your mullion at an ADA-compliant height, position the enclosure so that the top edge of the iPad screen is no higher than 48 inches above the finished floor.



Position the assembled mount on the mullion at the desired installation height and mark the holes

Using a felt-tipped marker, mark the two screw positions and the CAT cable hole position as shown.


Drill the mounting screw holes into the mullion