<aside> 💡 Keep your special assembly tool in a safe place. To purchase a replacement, please contact [email protected]

</aside>

In the box

  1. 1 x Heckler OnWall Mount

  2. 2 x Drywall Anchor (F155)

  3. 2 x Drywall Mounting Screw (F360)

  4. 2 X Cable Tie (F817)

  5. 1 x Enclosure Assembly Key (F529)

  6. 4 x Set Screw Assembly Key (F914)

  7. 1 x Right-angle USB-C adapter (F915)

    H658 in the box-01.png

Mount the pocket to your wall

<aside> 💡 Use the fully assembled OnWall Mount as your hole template

</aside>

Determine your height of your installation

<aside> ⚠️ To install your iPad mini to your Drywall at an ADA-compliant height, position the enclosure so that the top edge of the iPad mini screen is no higher than 48 inches above the finished floor.

</aside>

height setting-01.png

Review the hole and slot patterns on the pocket

hole pattern definition rev-01.png

Hold the enclosure to the Drywall at its desired installation height

Mark the two screw positions and the CAT cable hole position as shown.