In the box

  1. 1 x Heckler Front Mount

  2. 1 x Mullion-mounting Screw (F063)

  3. 2 x Rubber Washer (F064)

  4. 2 X Cable Tie (F817)

  5. 1 x Enclosure Assembly Key (F529)

  6. 4 x Set Screw Assembly Key (F914)

  7. 1 x USB-C to right angle USB-C adapter (F915)

    H657 in the box-01.png

<aside> 💡 Keep your assembly tools in a safe place. To purchase a replacement, please contact [email protected]


Mount the pocket to your mullion

<aside> 💡 Use the fully assembled Front Mount as your hole template


Determine your height of your installation

<aside> ⚠️ To install your iPad mini to your mullion at an ADA-compliant height, position the enclosure so that the top edge of the iPad mini screen is no higher than 48 inches above the finished floor.


height setting front mount rev1-01.png

Position the assembled mount on the mullion at its desired installation height

Using a felt-tipped marker, mark the two screw positions and the CAT cable hole position as shown.

mark hole-01.png

Drill the mounting screw holes into the mullion

<aside> ⚠️ Please review the internal structure of your mullions to ensure drilling holes and installing screws will not strike internal elements such as glass or electrical wiring.