In the box

H1286-in-the-box.png

  1. 1 x Accent Wall Panel
  2. 6 x Command™ strips

H1286-measure.png

Measure vertically from the top edge of the displays to the top surface of the Framework shelf.

H1286-trim.png

Compare H with the 47 in panel height. If H is shorter, trim the excess.

H1286-peel-liner.png

Peel the release liners from the Command™ strips on the back of the panel.

H1286-remove-one-display.png

Remove one display to expose the center gap. The right display is shown removed.

H1286-slide-panel.png

With one display removed, slide the panel behind the remaining display and the backsplash.

H1286-align-and-press.png

Set the panel top flush with or slightly below the display top. Press firmly over each strip location, then reinstall the removed display.

H1286-completed-installation.png

Done.