In the box

• Rally Bar Mount Bracket
• Assembly thumbscrews (2)
• 1/4-20 Camera-mounting screws (2)

<aside> 💡

The Rally Bar Mount is compatible with Logitech Rally Bar, Rally Bar Mini, and Rally Bar Huddle.

</aside>

<aside> 💡

The Rally Bar Mount attaches to the H1041 Hub for Heckler Mobile Fleet. Ensure your Hub is installed on your Heckler Mobile Fleet rolling stand before beginning this installation.

</aside>

<aside> 💡

For assembly, you have two options:

1. Fasten the bracket to your Rally Bar before attaching it to the Hub tray.
2. Secure the bracket to the Hub tray before mounting your Rally Bar.

Choose the method that works best for your setup.

</aside>

Remove the shelf top from the Hub.

Center the Rally Bar Mount along the tray and insert the threaded posts through the slots in the tray's rear surface.

<aside> 💡

While centering the camera's mounting position is typical, you can position the Rally Bar Mount anywhere along the tray's length.

</aside>

Secure the Mount to the tray using the provided thumb nuts.

Attach Rally Bar to the Rally Bar Mount

Use the included 1/4-20 screws to fasten your Rally Bar to the mount.

<aside> ⚠️

Caution: Do not over-tighten the screws, as this may damage your device.

</aside>

Connect the cables to your Rally Bar.

Guide the cables through the slots in the Rally Bar Mount and into the tray.

Attach the rear cover to your Rally Bar.

Replace the shelf top on the tray.