In the box

  1. Felt Panel Set. 1 x Large Panel (F241) and 2 x Small Panels (F242).
  2. Device Shelf for Heckler Confidence Stand. Column (R1024-BK) and Shelf (R1025-BK).
  3. Velcro Strap (F856)

H1011 render.1105-01.jpg

Fasten the column to the shelf

Align the metal tab on the bottom of the column with the cutout on the shelf.

<aside> 💡

Either orientation is fine.

</aside>

1-plug-the-column.gif

Tighten the thumbscrew from the bottom of shelf.

2-tighten-screws.gif

Install the shelf to the stand

<aside> ⚠️

Verify both spring buttons have engaged with the beam.

</aside>

<aside> 💡

Position the shelf as shown to ensure correct panel installation.

</aside>

3-plug-the-shelf-to-stand.gif

Install panels

Push the metal tabs on the shelf into the slots on the rigid felt panels.

4-snap-on-the-felt-panels.gif

<aside> 💡

You can mount your gear before or after you have installed the shelf to Heckler Confidence Stand.

</aside>